Packaging - 三品空间 - Powered by Discuz!

图文精华

登录入驻

三品空间»论坛 › 三品空间› Packaging

Packaging

收录了 811 篇文章 · 0 人关注

版块操作

关注本版 RSS订阅

发布新帖

我希望我们专业

新窗全部主题最新热门热帖精华更多 \| 显示置顶		作者	回复/查看	最后发表


Not only the film materials are enabled with excellent properties , but also a certain bonding strength should be achieved by the bi-component adhesive.	Bruce 2024-11-22	0202	Bruce 2024-11-22 11:55
Good mechanical strength is required in this foil laminate, as the 1000ml of sugar granules will be well protected, from the product filling, to the distribution process.	Bruce 2024-11-22	0173	Bruce 2024-11-22 11:55
This triplex foil PET12/PET12/LDPE95 is stiff enough to provide a great standing profile for the final products, as you can watch the finished package with 900 gr of sugar granules filled.	Bruce 2024-11-22	0184	Bruce 2024-11-22 11:55
In this case, anti-static property will be enabled on the film to fight against the sugar dust in the produce and fill operations.	Bruce 2024-11-22	0186	Bruce 2024-11-22 11:55
When LDPE film is made into film, the durable property enables it widely applied for the multilayer packages of various products.	Bruce 2024-11-22	0154	Bruce 2024-11-22 11:54
LDPE, short for low density polyethylene, occupys a large part of the fossil chemical materials in the packaging area.	Bruce 2024-11-22	0182	Bruce 2024-11-22 11:54
When PET film works as the outside printed layer, the final foil laminate will be able to stand the high temperature in the heat sealing process, and achieve a smooth sealed surface than BOPP film laminate.	Bruce 2024-11-22	0186	Bruce 2024-11-22 11:22
PET film, is one of the most common polyester film applied in the flexible packaging and printing area	Bruce 2024-11-22	0200	Bruce 2024-11-22 11:21
so usually we keep a promise to keep the tolerance under +-10% of the expect thickness.	Bruce 2024-11-22	0252	Bruce 2024-11-22 11:21
Please note, as there is still some tolerance with the thickness for the substrate film, especially the thickness of LDPE film fluctuate a lot when it is blown from the extrusion die	Bruce 2024-11-22	0221	Bruce 2024-11-22 11:21
the thickness comes at 0.122mm (equals to 122 microns)	Bruce 2024-11-22	0195	Bruce 2024-11-22 11:21
the printing inks and adhesive will of course, take a part of the overall thickness	Bruce 2024-11-22	0224	Bruce 2024-11-22 11:20
After lamination of these 3 layers which is usually achieved through solvent-free laminate process in our manufacturing plant, the thickness actually will increase in some extent	Bruce 2024-11-22	0342	Bruce 2024-11-22 11:20
Normally, people would buy a certain amount like 500ml to 1000ml of sugar each time for this family purpose.	Bruce 2024-11-22	0291	Bruce 2024-11-22 11:20
The pouch is made of triplex transparent film materials which can provide enough stiffness to support an excellent standing profile when the sugar product is filled	Bruce 2024-11-22	0260	Bruce 2024-11-22 11:20
Below picture shows a great standup spout pouch for 1000ml sugar granule that serve so well for family package purpose.	Bruce 2024-11-22	0220	Bruce 2024-11-22 11:19
A great package should be able to tell.	Bruce 2024-11-22	0164	Bruce 2024-11-22 11:19
the plastic closure will achieve so fine re-sealing of this package, which create an enclose environment for the sugar products, for a better protection.	Bruce 2024-11-22	0160	Bruce 2024-11-22 11:19
Furthermore, the corner spout allows the sugar granules poured out in a well controlled way, which will surely aovid the sharp pop-out of so much volume,	Bruce 2024-11-22	0157	Bruce 2024-11-22 11:19
some may start up a plan trying to set their lovely logo on this standup pouch.	Bruce 2024-11-22	0161	Bruce 2024-11-22 11:18

1 ... 3 4 5 6 789 10 11 12 ... 41 / 41 页下一页

快速发帖

关于我们· 联系我们· 加入我们· Archiver·手机版·小黑屋· 合作伙伴

中国 / 鲁ICP备17027311号-4 举报电话：15969813136

意见
反馈